Pipe Flanges Raw Material Specifications

Requirements are valid for normal situation, in special you have to contact us to introduce.
Material
Test basis / Requirements
Delivery Condition
 C 22.8 (1.0460) DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009
  DIN 17243: 01.87
  VdTÜV - WB 350/3: 2009
 +N
 P250GH (1.0460) DIN EN 10222-2: 04.2000
  National Annex
 +N
 P245GH (1.0352) EN 10222-2:1999-12 + AC : 2000-02
 +N
 A105N / C21 ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
  + VdTUEV399/3: 1996-09
  + NACE MR 0175: 2000
 +N
 A105N ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
  + NACE MR 0175: 2000
 +N
 C21 (1.0432) VdTUEV - WB 399/3: 1996-09
 +N
 RSt 37-2 (1.0038) DIN 17100: 1980-01
 +N
 S235JR (1.0038) DIN EN10025-2: 2005-04
 +N
 16Mo3 (1.5415) DIN EN10222-2:1999-12 + AC:2000-02
 +N
 WStE355 / TStE355
  (1.0565 / 1.0566)		 DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
 +N or QT
 P355NH  (1.0565) DIN EN10222-4: 1998 + A1: 2002-12
 +N
 WStE355 / P355NH
  (1.0565)		 DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
  + DIN EN10222-4: 1998 + A1: 2002-12
  + DIN EN17103 :1989-10
  + DIN EN10222-4: 1998 + A1: 2002-12
 +N or QT
 1.4301 (X5CrNi17-10) DIN EN10222-5: 2000-02
 +AT
 1.4306 (X2CrNi19-11) DIN 17440:1996-09
 +AT
 1.4401 (X5CrNiMo17-12-2) DIN EN10222-5: 2000-02
 +AT
 1.4404 (X2CrNiMo17-12-2) DIN EN10222-5: 2000-02
 +AT
 1.4432 (X2CrNiMo17-12-3) DIN EN10222-5: 2000-02
 +AT
 1.4541 (X6CrNiTi18-10) DIN EN10222-5: 2000-02
 +AT
 1.4571 (X6CrNiMoTi17-12-2) DIN EN10222-5: 2000-02
 +AT
 1.4541 / F321 DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4571 / F316Ti DIN EN10222-5: 2000-02 / +ASTM A 240
 +AT
 1.4404 / F316L DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4306 / F304L DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005
 +AT
 1.4307 / F304L DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
Flange
Test basis / Requirements
 DIN, Carbon Steel DIN2519:1991-06
  + AD2000-W9: 02.04; -W13/ TRD107;TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN, corrosion-resistant Steel DIN2519:1991-06
  + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Carbon Steel DIN EN 1092-1: 2008-09
  + AD2000-W9; -W13/TRD107;TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Stainless Steel DIN EN 1092-1: 2008-09
  + AD2000-W9; -W2; -W10/ TRD107; TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 ANSI ASME B16.5:2003
  ASME B16.47:2006

Basic requirements for Material and Fitting
Requirements are valid for normal case, in special case you have to contact the technical department.

Material
Test basis / Requirements
Delivery Condition
 1.4541 (X6CrNiTi18-10) DIN 17458:1996-09
+AT
 1.4571 (X6CrNiMoTi17-12-2) DIN 17458:1996-09
+AT
Fittings
Test basis / Requirements
 DIN2609 Stainless Steel VdTUEV –MB 1252/ AD2000- W2; W10/TRD107;TRB100
T-Piece Directive 97/23/EG Annex I, Chap. 4.3:1998-02
Bow DIN2615-1
ReducerDIN2605-1
DIN2616-1
标签： , , , , , ,

Get in Touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.
You can get in touch by telephone, post, online or E-mail.
Please check the help section first to see if your question may be answered there.